型号 AT

铝制通风格栅,带独立可调的水平叶片

带水滴状叶片的格栅

  • 名义尺寸 225 × 125 – 1225 × 525 mm
  • 风量范围 23-2000l/s 或 83-7200m³/h
  • 铝制格栅表面阳极氧化处理
  • 面板宽度,23 mm or 27 mm
  • 隐藏螺丝固定


可选的设备及配件

  • 格栅表面RAL标准色
  • 安装框架
  • 安装框架安装过滤网
  • 附件可用于风量平衡和控制送风方向
  • 弹簧卡固定

AT-A/825×225 00135813_0
  • 应用
  • 描述

应用

  • AT型通风格栅可作为送风或排风,适用于舒适性区域或工业区域
  • 定向角度送风的混合通风形式
  • 可调叶片可以满足现场需求
  • 用于定变风量
  • 送风温差: –12 至 +4 K
  • 可安装于墙面,梁和方形管道

特性

  • 独立可调叶片
  • 两种边框厚度
  • 隐藏螺钉安装,弹簧卡安装或沉头孔
  • 可选配安装框架和套管装配过滤介质

名义尺寸

  • 名义长度: 225, 325, 425, 525, 625, 825, 1025, 1225 mm
  • 名义高度: 125, 225, 325, 425, 525 mm


其他尺寸要求

选项

面框

  • 宽度: 27mm
  • G11: 23 mm 宽


装配

  • 隐藏螺丝固定
  • E11: 隐藏螺丝固定 (23 mm)
  • A11: 沉头孔 (仅 27 mm)
  • B11: 弹簧卡固定 (27 mm)
  • H11: 弹簧卡固定 (23 mm)

组成和特点

  • 内侧带倒角的斜边
  • 独立可调水平叶片
  • 工厂配套密封
  • 用于规格大于625mm的垂直中框

附件

  • AG, AS, D, DG可用于风量平衡和控制送风方向

附件

  • 安装支架:用于格栅的快速安装
  • 过滤器外壳:带过滤的框架或弹簧卡固定(仅适用于27mm面板宽度)

结构特点

  • 不对称叶片

材料和外观

  • 边框和导流叶片采用铝型材
  • 阳极氧化,E6-C-0,铝本色
  • P1: 粉末喷涂,RAL标准色

标准和指南

  • 声功率级噪声根据EN ISO 5135测量

维护

  • 无需维护的结构和材料不受磨损
  • 根据VDI6022标准进行检查和清洗

技术信息

  • 性能
  • 技术
  • 产品说明
  • 订货代码
FK-EU带熔线的示意图 00148411_0

①箱体
②阀片
③阀片到OPEN位置
④阀片到CLOSED位置
⑤检修口
⑥熔线
⑦安全机构
⑧手动锁死
⑨锁死

名义尺寸225 × 125 至 1225 × 525 mm
最小风量23 – 685 l/s 或 83 – 2466 m³/h
在L时最大体积流量WA 无附件最大噪声 40dB(A)115 – 2000 l/s 或 414 – 7200 m³/h
送风温差–12 至 +4 K

送风的风量范围


铝制矩形通风格栅,可用于送风或排风 美观的内侧带倒角的斜边,可用于墙面或梁上安装,同样适用于方形管道连接

预安装组件,由边框和独立可调的水平叶片组成

隐藏螺钉安装,弹簧卡安装,沉头孔或用安装框架进行安装

根据EN ISO 5135测得空气再生噪声

特性

  • 独立可调叶片
  • 两种边框厚度
  • 隐藏螺钉安装,弹簧卡安装或沉头孔
  • 可选配安装框架和套管装配过滤介质

材料和外观

  • 边框和导流叶片采用铝型材
  • 阳极氧化,E6-C-0,铝本色
  • P1: 粉末喷涂,RAL标准色

技术参数

  • 名义尺寸: 225 × 125至1225 × 525mm
  • 最小风量(送风): 23 – 685 l/s 或 83 – 2466 m³/h
  • 在L时最大体积流量WA 不带附件最大噪声 40 dB(A) : 115 – 2000 l/s 或 414 – 7200 m³/h
  • 送风温差: –12 至 +4 K

00135413_0

                                                                              型号
                                                                                                                                                                  AT       单层百叶
                                                                      

                                                                              附件
                                                                                                                                                                  A       不包括(仅格栅)
                                                                                                                                                                  AG       对开阀
                                                                                                                                                                  AS       风量调节阀
                                                                                                                                                                  D       双层格栅叶片与前排成90°排列,独立可调
                                                                                                                                                                  DG       双层格栅与AG阀结合
                                                                      

                                                                              名义尺寸 [mm]
                                                                                    L × H
                                                                      

 

                                                                              安装框架
                                                                             不选:无
                                                                                                                                                                  A1       正面边框宽度F = 27mm
                                                                                                                                                                  B1       正面边框宽度F = 23mm
                                                                      

                                                                              固定
                                                                                    不选:隐藏螺钉固定,F=27mm
                                                                                                                                                                  G11       隐藏螺丝固定 F = 23mm
                                                                                                                                                                  A11       沉头孔 F = 27mm
                                                                                                                                                                  B11       弹簧卡固定 F = 27mm
                                                                                                                                                                  H11       弹簧卡固定 F = 23mm
                                                                      

                                                                              外表面
                                                                                    不选:E6-C-0电镀,铝本色
                                                                                                                                                                  P1       粉末喷涂,指定RAL标准色
                                                                      

                                                                                                                                                                  光泽度GL
                                                                                    RAL9010 50%
                                                                                    RAL9006 30%
                                                                                    其他RAL标准色 70%
                                                                      

 

Referenzen

Berggasthof Platzlalm

  • PROJECT
  • OUR JOB
  • SOLUTION

Hochzillertal – Berggasthof Platzlalm

An air of luxury. There is no reason why a cosy mountain inn should not be every bit as comfortable as a 5-star hotel.

Berggasthof Platzlalm can be found right in the popular ski resort Hochfügen, Hochzillertal, near the alpine road Zillertaler Höhenstrasse. The chalet offers 30 sleeping possibilities, a great sun deck and, for ultimate relaxation: a sauna – all at an altitude of approx. 1,800 metres.

 

Its blend of traditional and modern design creates a pleasant, welcoming atmosphere. It is a place where you simply feel good.

TROX components ensure a comfortable indoor climate

 

TROX components ensure a comfortable indoor climate. Products from the air handling expert, such as swirl diffusers, grilles, disc valves, fire dampers and volume flow controllers, were installed in the mountain inn, for example, in the bar lounge and in the dining and sitting room. Naturally, the installation had to comply with technical requirements for air handling and noise,  but the visible technological elements also had to match the overall visual appearance of the rooms and lounges, characterised by beautiful old wood. The grilles from TROX were perfect for the job.

TROX products in the Hochfügen ski resort

 

Thanks to the installed components from TROX, guests will be comfortable in the inn no matter the temperature outside. Furthermore, the tried and tested fire dampers ensure a high degree of safety. TROX products create an excellent indoor climate and pleasant atmosphere – even in winter and at 1,800 metres!

分享页面

推荐这个页面

您可以将这个页面作为链接推荐给您的朋友。

带(*)的项目为必填项.

分享页面

感谢您的推荐!

您的推荐已发出并将很快送达。


联系表

我们竭诚为您服务

Visual contact Visual contact

请留下您的信息和留言
Tel.: +86 (0)512/67168869 | Fax: +86 (0)512/67168879

所有带(*)的为必填项.

联系

感谢您的留言!

Visual contact Visual contact

您的留言已发送,将会马上处理。
我们将尽快联系您。
对于产品和服务相关的问题,您也可以直接拨打我们电话:
Tel.: +86 (0)512/67168869 | Fax: +86 (0)512/67168879

联系表

我们竭诚为您服务

Visual contact Visual contact

请留下您的信息和留言
Tel.: +86 (0)512/67168869 | Fax: +86 (0)512/67168879

Anhang (max. 10MB)

所有带(*)的为必填项.

联系

感谢您的留言!

Visual contact Visual contact

您的留言已发送,将会马上处理。
我们将尽快联系您。
对于产品和服务相关的问题,您也可以直接拨打我们电话:
Tel.: +86 (0)512/67168869 | Fax: +86 (0)512/67168879